Complete line of water structuring and energising units creating spring like water nature's way.
SCALE BLASTER PRO
SCALE BLASTER PRO
The professional grade SB-MAX PRO SERIES is undisputedly the most advanced residential ScaleBlaster model ever developed. This unit delivers extraordinary results in solving hard water issues and limescale buildup and formation.
Constructed in a durable, heavy duty aluminum enclosure, this attractive model is designed to handle virtually any size of house or water hardness level.
- Works on Copper, PVC, CPVC & PEX pipe and on galvanized with a slight modification
- Indoor or outdoor installations
- Homes under 5,000 square feet
(If your house is over 5,000 square feet, a second ScaleBlaster unit may be needed. Please contact us for details.)
- Calcium hardness (Ca) levels up to 40 grains per gallon (gpg) or 684 parts per million (ppm)
- 60% more powerful than other ScaleBlaster models
- 10-year warranty – more than 3 times longer than other ScaleBlaster models
- UL, CUL listed
SB-MAX PRO SERIES ELECTRONIC DESCALER
PIPE SIZE CAPACITY: up to 11⁄2" pipe size diameter. Designed for residential use only. UL, CUL Listed. PIPE TYPE: PVC, CPVC, PEX, Copper or any non-ferrous based pipe.
INPUT VOLTAGE: 90-264 VAC @ 47 to 63 Hz, using auto switching power supply
INPUT POWER: 20 Watts
OPERATING TEMPERATURE: 32° F to 130° F
STORAGE TEMPERATURE: 10° F to 150° F
OUTPUT VOLTAGE: No more than 5 Volts DC (open circuit).
OUTPUT FUSE: 3.15 Amp, 250 VAC, 5x20 mm, Slow-Blow fuse, Radio Shack part # 270-1065
DESCALING METHOD: The control box supplies a square wave signal to a coil of wire that is wrapped externally around the
incoming pipeline entering the home. The signal sweeps all the frequencies from 1,000 to 20,000 Hz at a rate of 20 times a second. This produces a modulating frequency waveform that hits the resonant frequency of the calcium molecules causing them to lose its adhesiveness.
ENCLOSURE DIMENSIONS: 9” wide x 3.625” deep x 6.5” tall
ENCLOSURE MATERIAL: Extruded Aluminum - 6063-T% Electro-Chemical etched exterior that converts the metal surface
into a decorative, durable, corrosion-resistant, anodic oxide finish. End caps – NEMA 4 ABS 94VO material with
SIGNAL CABLE: A special 18 AWG stranded wire, 52 feet long (not available in hardware stores), is included with the unit. WARRANTY: 10 years
SHIPPING WEIGHT: 6 lbs.
CARTON DIMENSIONS: 12.5” wide x 5” deep x 12.5” tall
What about galvanized pipe?
All ScaleBlaster units can work on galvanized pipe, however the area where you wrap the signal cable at must be a non-magnetic pipe such as copper or PVC. Galvanized pipe is magnetic and our signal cannot penetrate that. The installation of ScaleBlaster involves wrapping a signal cable around the outside of the pipe on the incoming pipeline going to the home. This small area is only about 6”-8” inches of pipe and can easily be replaced by a handyman or plumber. You can still have galvanized pipe downstream of the signal cable location and it will get descaled from that point. Even if you have mixture of galvanized pipe and others plumbed together, it will work fine from the signal coil area downstream.